REALTIME FLOWS    U. Kern: n/a cfs    L. Kern: 1341 cfs    E.W: 312 cfs    U. Owens: 108 cfs    L. Owens: 496 cfs   09/02/19 1:15 PM PST

FlyAddict’s New Custom Net - The Unveilling…

For topics that don't seem to have a home elsewhere.

FlyAddict’s New Custom Net - The Unveilling…

Postby Fishfreak911 » December 17th, 2011, 8:33 pm

Let me preface this post by saying that I think I have more time in this post than I do in the dang net!
Well, I finally finished Mark’s custom fly fishing net. It came out great. He actually helped me pick out the wood to be used on this net (mark’s quite the accomplished woodworker for those that don’t know) He selected a highly figured Claro Walnut piece for the handle, and Mahogany sandwiched between two pieces of Wenge to form the hoop.
I’ll walk you through the process of building this custom fly fishing net:
Here are the beginning slabs of tree that were chosen for the handle. It’s highly figured curly Claro Walnut. It is very NOT FLAT at this point. Note that I cut out an oversized handle blank .
Image
Note that there are two book-matched pieces that must be glued together to form the handle. This actually makes the handle even stronger than a single piece. This is why I needed to cut the handle oversized. When you clamp the 2 pieces, they inevitably slide around a bit.
Image
The two pieces now need to be run trhough a drum sander to flatten them out for glue-up.
These are the oversized handle pieces being glued up
Image
Here is the glued up rough handle blank.
Image
I use acrylic handle templates so I can position the template over the most beautiful parts of the grain.
Image
The handle just after roughing it out on the band saw.
Image
Image
Using an oscillating spindle sander to shape the handle and prepare it for glue-up.
Image

Here, I begin the glue up on a platen that is later removed.
Image
Near the end of the glue up phase.
Image
Here, after removing the platen, adjustments are made to the clamps and handle, and the net is hung out to dry for at least 24 hours.
Image


Filing down the center contour of the handle.
Image
Here, I use a Japanese rasp to contour the handle. This part is all done by feel.
Image
I sand from 80 grit to 100 grit, to 150 grit, to 180 grit, to 220 grit to 320 grit, to 400. Here, I’m sanding with 400 grit sandpaper: That is so fine, it feels about as smooth as your skin and it barely removes any material. Also, note the spot light i use to check for minute scratches from previous grits. This keeps them from popping up at finishing time. Each net is inspected like this through each sanding & finishing phase.
Image

First coat of recipe 1 of 3 of my proprietary oil mixture. Each coat get at least 3-4 applications and is wiped off almost immediately.
Image
Image

After carving the fly with both a high speed .0157” router bit, and an Exacto knife, I tape over it so aluminum doesn’t get stuck in the surrounding grain holes.
Image
Same goes for Marks name which was also inlaid in Aluminum in to the hoops inner face.
Image
Image

Image
Image
Here, the aluminum filings have been added to the fly carving and a permanent adhesive ensure it never leaves. This is before filing and sanding the “hump” left by the tiny filings.
Image
A finished close up of the Aluminum Fly inlay. No net yet. AND the sharp-eyed tyers may have noticed I forgot the tail! DOH! I added it later.
Image
Finished w/o net.
Image

Nice views of the finished handles.
Image
Image
Image

Image
Image
Image
Image
This is a custom built stretch net safety lanyard built for Fly Addict. It is about 10" long and stretches 5 feet. All hardware is stainless steel, and the red loop is for him to attatch the net safety lanyard to his waders belt. this is cheap isurance!
Image
Image

Close up of the finished inlay of a Royal Wulff.
Image
Image
Image
Image


Hope you all enjoyed this. It was a fun build, and my fly club went gaga over this net more than any other. Have fun with it Mark!
Greg<><
Creating the finest custom flyfishing nets on the planet is my passion!

http://www.Sierra-Nets.com
User avatar
Fishfreak911
 
Posts: 887
Joined: July 8th, 2010, 4:02 am
Location: Garden Grove, Ca.

Re: FlyAddict’s New Custom Net - The Unveilling…

Postby Dry Fly Rie » December 17th, 2011, 9:37 pm

Truly magnificent. I'm deeply in awe of your talent and vision.
User avatar
Dry Fly Rie
 
Posts: 1462
Joined: June 28th, 2011, 11:40 pm
Location: San Diego, CA

Re: FlyAddict’s New Custom Net - The Unveilling…

Postby Wildman » December 17th, 2011, 9:59 pm

Image

OMG....I have clamp envy!

Seriously, what an incredible net. The number of steps in creating is mind boggling. The skill and creativity is inspiring. I am looking forward to having Mark net a few of my fish with that beauty.
"Tomorrow is the most important thing in life. Comes into us at midnight very clean. It's perfect when it arrives and it puts itself in our hands. It hopes we've learnt something from yesterday."
John Wayne
User avatar
Wildman
Site Admin
 
Posts: 3747
Joined: August 17th, 2008, 2:07 pm

Re: FlyAddict’s New Custom Net - The Unveilling…

Postby stanbery » December 17th, 2011, 10:35 pm

Greg

Look awesome!! I think you can fit at least 2 or 3 more clamps on the hoop! :funnyup:

Jon
Image
2013: Days on the Water so far - 29
2014: Days on the Water so far - 28
User avatar
stanbery
 
Posts: 4410
Joined: July 26th, 2008, 2:00 am
Location: Palmdale CA

Re: FlyAddict’s New Custom Net - The Unveilling…

Postby tomsakai » December 18th, 2011, 12:38 am

Very nice Greg. Wish I'd known it was Mark's when I saw it at the club meeting. I would have really taken a closer look at a fine product.
tomsakai
 
Posts: 1109
Joined: March 27th, 2009, 7:22 am
Location: The OC

Re: FlyAddict’s New Custom Net - The Unveilling…

Postby Benny » December 18th, 2011, 1:34 am

Wow! I don't think I'd want to fish with it it's so nice.
Benny
 
Posts: 3328
Joined: July 28th, 2008, 11:11 pm

Re: FlyAddict’s New Custom Net - The Unveilling…

Postby Rob909 » December 18th, 2011, 7:47 am

Awesome!!!


Rob
User avatar
Rob909
 
Posts: 1029
Joined: August 21st, 2008, 2:54 pm
Location: Inland Empire, CA

Re: FlyAddict’s New Custom Net - The Unveilling…

Postby fly addict » December 18th, 2011, 8:13 am

Greg,
The net looks awesome, it is a piece of functional art, and I’m thinking of a place to hang it in my house! Nobody is building nets that are anyway near the quality and craftsmanship that you put into your nets!
Mark
Make Fly Fishing Great Again!
User avatar
fly addict
 
Posts: 2560
Joined: August 3rd, 2008, 1:57 pm
Location: In your honey hole!

Re: FlyAddict’s New Custom Net - The Unveilling…

Postby WanderingBlues » December 18th, 2011, 9:00 am

THAT was a fascinating report. Everything thin about it, the attention to detail, the craftsmanship, the passion.... It's really a beautiful piece that I'm sure Mark will cherish.
"We're a cross between our parents and hippies in a tent...."
180 Degrees South
User avatar
WanderingBlues
 
Posts: 5299
Joined: December 2nd, 2009, 10:49 am
Location: Living in a Tin Can

Re: FlyAddict’s New Custom Net - The Unveilling…

Postby JGFLYFISH » December 18th, 2011, 9:52 am

Impressive work! Added to my long WANT list....
JGFLYFISH
 
Posts: 46
Joined: August 11th, 2011, 6:13 pm

Re: FlyAddict’s New Custom Net - The Unveilling…

Postby briansII » December 18th, 2011, 9:56 am

Fishfreak911 wrote: It was a fun build, and my fly club went gaga over this net more than any other. Have fun with it Mark!


I can see why. That net is a work of art!

briansII
User avatar
briansII
 
Posts: 4902
Joined: September 3rd, 2008, 12:39 pm
Location: Central Ca.

Re: FlyAddict’s New Custom Net - The Unveilling…

Postby 1mocast » December 18th, 2011, 10:45 am

:shock:
That is some craftsmanship!
Dead emoji's due to Photobucket. :(
User avatar
1mocast
 
Posts: 2932
Joined: July 4th, 2008, 10:26 pm
Location: Cuidad de Los Angeles

Re: FlyAddict’s New Custom Net - The Unveilling…

Postby flybob » December 18th, 2011, 11:29 am

Greg, a work of art to be sure!
I love you powdered metal impregnations!

I also like the acrylic template......what a great idea!

OK Mark, lets see a photo with a huge brownie in it!
"The accomplishment of flyfishing is all about the experience of diversity......and the occasional element of surprise."
(rmg/2012)
Image
User avatar
flybob
 
Posts: 4275
Joined: July 27th, 2008, 10:26 am
Location: S. Orange County

Re: FlyAddict’s New Custom Net - The Unveilling…

Postby beachbum » December 18th, 2011, 12:06 pm

That net is absolutely beautiful!! Well done!! Mark will be the subject of net envy. :funnyup:
Set the hook!
Image
User avatar
beachbum
 
Posts: 3616
Joined: December 3rd, 2008, 2:54 pm
Location: Camarillo, CA

Re: FlyAddict’s New Custom Net - The Unveilling…

Postby Bernard » December 18th, 2011, 12:11 pm

Seeing the steps of the process really is great.
I have viewed this thread three times just to process it.
Thanks for sharing!
B
User avatar
Bernard
 
Posts: 1412
Joined: July 21st, 2008, 7:07 pm
Location: Southern California - Most of the time ...

Next

Return to General Fly Fishing

Who is online

Users browsing this forum: No registered users and 18 guests