REALTIME FLOWS    U. Kern: n/a cfs    L. Kern: 1341 cfs    E.W: 312 cfs    U. Owens: 108 cfs    L. Owens: 496 cfs   09/02/19 1:15 PM PST

2017 IFTD / ICAST Show Report - Photo Heavy

For topics that don't seem to have a home elsewhere.

2017 IFTD / ICAST Show Report - Photo Heavy

Postby hopperdropper » January 3rd, 2018, 2:49 pm

Sadly, I began this as a draft back in 2017 right after the show. Right at that time I learned about the Photobucket issue and never posted this as I did not have the time to figure our a new image host. Now I have signed on with Imgur and figured I would share some photos I took at the show, though a bit late...

By sheer luck I was in Orlando for work and noticed that the IFTD / ICAST show was in town. Couldn't pass this up as I have never been and cleared my schedule for a few hours on the last day of the show. They wanted to charge me $250 for a badge but luckily I was able to go the classy route and pulled someone's out of a trash can...

Spent time mostly in the IFTD area. Here are some photos I was able to take. Sorry for some of the poor pics. Seems that many of the booths were in disarray as it was the last day. Many times when I entered a booth the staff simply watched from their chairs. Enjoy!

One of the booths I was surprised and excited to see was the Ty-Rite booth. Some friends of the original owners have resurrected the company are an offering the original Ty-Rite products. I know I've collected many of these over the years. They said they are honoring all past products with their Lifetime Warranty and will replace any free of charge.

Image
Image

Sage had a great display which included an amazing fishing van! Also of interest at their booth was the new graphite Foundation series which will retain for $325 and is made in the USA... pretty nice to see.

Image
Image
Image
Image
Image

Hardy had a cool booth with a beautiful float boat.

Image
Image
Image
Image

G Loomis won best new rod award for their IMX-Pro series of rods.

Image
Image
Image

Abel's booth had reels and line clippers in every color combo imaginable.

Image
Image
Image

Anyone fishing a Taylor reel? I have been wanting to try one out.

Image
Image

Here is a link to the Imgur library of more of the photos I took. Perhaps I can schedule a trip to visit my employees in Orlando again this year when the show is running and provide a more thorough report of new products...

https://imgur.com/a/ZEtq0
------------------------------------
Jeff
User avatar
hopperdropper
 
Posts: 39
Joined: October 11th, 2010, 8:49 am
Location: Pomona, CA

Re: 2017 IFTD / ICAST Show Report - Photo Heavy

Postby fly addict » January 4th, 2018, 4:00 pm

Thanks for the post, I have never been to that show, it looks a lot better than the Fred Hall Show in Long Beach. I have a Ty-Rite tool, use it always, along with a Ketchum Release tool and a EZ lap hook file.
Make Fly Fishing Great Again!
User avatar
fly addict
 
Posts: 2560
Joined: August 3rd, 2008, 1:57 pm
Location: In your honey hole!

Re: 2017 IFTD / ICAST Show Report - Photo Heavy

Postby flyster » January 4th, 2018, 5:51 pm

Loomis IMX!! I just busted my IMX 4WT. I built in the 90's. Looks like I will just have to send it in for a replacement IMX-Pro series. Thanks for the post.
" Boy it's going to be really hard not to do this again tomorrow!!"
User avatar
flyster
 
Posts: 848
Joined: February 28th, 2010, 5:26 pm
Location: Pomona,Ca.


Return to General Fly Fishing

Who is online

Users browsing this forum: No registered users and 6 guests